GATE 2017 ME Set 1 · Question 10
Saturated steam at condenses on the outside of a tube. Cold fluid enters the tube at and exits at . The value of the Log Mean Temperature Difference (LMTD) is _________ .
GATE 2017 · Mechanical Engineering · Set 1 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
For a condenser, the hot fluid undergoes a phase change at constant temperature, so . The cold fluid temperatures are and .
The temperature differences at the two ends are:
The Log Mean Temperature Difference (LMTD) is given by:
Substituting the values:
Answer: 63.83
Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Exchangers: LMTD & Effectiveness-NTU Methods
- GATE 2017 ME Set 2 · Q46In a counter-flow heat exchanger, water is heated at the rate of 1.5 kg/s from 40 °C to 80 °C by an oil…
- GATE 2016 ME Set 2 · Q52Consider a parallel-flow heat exchanger with area Ap and a counter-flow heat exchanger with area Ac. In both…
- GATE 2016 ME Set 3 · Q28For a heat exchanger, Δ T is the maximum temperature difference and Δ T is the minimum temperature…
- GATE 2015 ME Set 2 · Q52A balanced counterflow heat exchanger has a surface area of 20 m2 and overall heat transfer coefficient of…
- GATE 2015 ME Set 3 · Q22Saturated vapor is condensed to saturated liquid in a condenser. The heat capacity ratio is Cr = C C . The…
- GATE 2014 ME Set 2 · Q26In a heat exchanger, it is observed that Δ T1 = Δ T2, where Δ T1 is the temperature difference between the…
Question from the official GATE 2017 ME paper (Set 1), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.