PARIXO GATE · ME Open the app

GATE 2018 ME Set 1 · Question 51

2 marksNumerical answerTheory of MachinesDynamic Force Analysis of Linkages

A slider crank mechanism is shown in the figure. At some instant, the crank angle is and a force of 40 N is acting towards the left on the slider. The length of the crank is 30 mm and the connecting rod is 70 mm. Ignoring the effect of gravity, friction and inertial forces, the magnitude of the crankshaft torque (in Nm) needed to keep the mechanism in equilibrium is _______ (correct to two decimal places).

Figure 1 for GATE 2018 ME Set 1 question 51

GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.41 in the ME section

Answer
1 to 1.2

From the official answer key published by IIT Guwahati.

Worked solution

Let the crank length be , connecting rod length , crank angle , and external slider force .

From the geometry of the slider-crank mechanism, with connecting rod inclination :


The displacement of the slider from the crankshaft center is:

Taking the derivative with respect to (or applying the principle of virtual work, ):

The required crankshaft torque magnitude to maintain equilibrium is:

Answer: 1.12

Practise Dynamic Force Analysis of Linkages

7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Dynamic Force Analysis of Linkages

Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.