GATE 2018 ME Set 1 · Question 63
The schematic of an external drum rotating clockwise engaging with a short shoe is shown in the figure. The shoe is mounted at point Y on a rigid lever XYZ hinged at point X. A force is applied at the free end of the lever as shown. Given that the coefficient of friction between the shoe and the drum is , the braking torque (in ) applied on the drum is \_\_\_\_\_\_ (correct to two decimal places).
GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.53 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
Let be the normal reaction between the shoe and the drum. Since the drum rotates clockwise, the friction force on the shoe acts to the right with magnitude:
Taking moments of all forces acting on lever XYZ about the hinge X for equilibrium ():
- Downward applied force at distance produces a counter-clockwise moment:
- Normal force upward at distance produces a clockwise moment:
- Friction force acting to the right at a vertical distance below X produces a counter-clockwise moment:
Setting the sum of moments to zero:
The braking torque on the drum of radius is:
Answer: 8.18
Practise Dynamic Force Analysis of Linkages
7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Dynamic Force Analysis of Linkages
- GATE 2016 ME Set 1 · Q45A slider crank mechanism with crank radius 200 mm and connecting rod length 800 mm is shown. The crank is…
- GATE 2015 ME Set 1 · Q24Consider a slider crank mechanism with nonzero masses and inertia. A constant torque τ is applied on the…
- GATE 2015 ME Set 2 · Q29A rope-brake dynamometer attached to the crank shaft of an I.C. engine measures a brake power of 10 kW when…
- GATE 2015 ME Set 3 · Q55A bullet spins as the shot is fired from a gun. For this purpose, two helical slots as shown in the figure…
- GATE 2021 ME Set 1 · Q40Consider a two degree of freedom system as shown in the figure, where PQ is a rigid uniform rod of length, b…
- GATE 2018 ME Set 1 · Q51A slider crank mechanism is shown in the figure. At some instant, the crank angle is 45° and a force of 40 N…
Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.