GATE 2019 ME Set 1 · Question 17
A spur gear with full depth teeth is transmitting at . The pitch circle diameter of the gear is . The magnitude of the force applied on the gear in the radial direction is
- A
0.36 kN
- B
0.73 kN
- C
1.39 kN
- D
2.78 kN
GATE 2019 · Mechanical Engineering · Set 1 · IIT Madras · printed as Q.7 in the ME section
Answer
From the official answer key published by IIT Madras.
Worked solution
The torque transmitted by the spur gear is given by:
With pitch circle diameter , the pitch radius is . The tangential tooth force is:
For a pressure angle , the radial force component is:
Answer: (B) 0.73 kN
Practise Spur & Helical Gears
5 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Spur & Helical Gears
- GATE 2014 ME Set 1 · Q42A pair of spur gears with module 5 mm and a center distance of 450 mm is used for a speed reduction of 5:1.…
- GATE 2014 ME Set 2 · Q50A spur pinion of pitch diameter 50 mm rotates at 200 rad/s and transmits 3 kW power. The pressure angle of…
- GATE 2025 ME · Q59A pair of spur gears is required to maintain a velocity ratio of 1:2. The module of the gears is 10 mm and…
- GATE 2020 ME Set 2 · Q51A steel spur pinion has a module (m) of 1.25 mm, 20 teeth and 20° pressure angle. The pinion rotates at 1200…
Question from the official GATE 2019 ME paper (Set 1), IIT Madras. Solutions by PARIXO AI. All 65 questions of this paper.