GATE 2020 ME Set 1 · Question 49
A rectangular steel bar of length , width , and thickness is cantilevered to a steel channel using 4 bolts, as shown.
For an external load of applied at the tip of the steel bar, the resultant shear load on the bolt at B, is ________ *(round off to one decimal place)*.
GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.39 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
The bolt group consists of identical bolts with center of gravity at . The coordinates of the bolts in mm are:
, , , and .
The radial distance of each bolt from is:
The external load is applied downwards at the top right corner (, ).
The clockwise moment about is:
1. Primary shear load on bolt B:
2. Secondary shear load on bolt B:
Since the moment is clockwise and bolt B is in the first quadrant at , the secondary force acts perpendicular to the radius vector in the direction :
3. Resultant shear load on bolt B:
Answer: 16.0
Practise Riveted & Bolted Joints
13 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Riveted & Bolted Joints
- GATE 2018 ME Set 2 · Q18Pre-tensioning of a bolted joint is used to
- GATE 2017 ME Set 1 · Q19Consider the schematic of a riveted lap joint subjected to tensile load F, as shown below. Let d be the…
- GATE 2017 ME Set 2 · Q35A steel plate, connected to a fixed channel using three identical bolts A, B and C, carries a load of 6 kN…
- GATE 2016 ME Set 3 · Q48A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is 25 mm2.…
- GATE 2015 ME Set 1 · Q56A horizontal plate has been joined to a vertical post using four rivets arranged as shown in the figure. The…
- GATE 2015 ME Set 3 · Q58A cantilever bracket is bolted to a column using three M12×1.75 bolts P, Q and R. The value of maximum shear…
Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.