GATE 2015 ME Set 1 · Question 56
A horizontal plate has been joined to a vertical post using four rivets arranged as shown in the figure. The magnitude of the load on the worst loaded rivet (in N) is ________
GATE 2015 · Mechanical Engineering · Set 1 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
The rivet group has four symmetrically arranged rivets forming a square of side . The centroid of the rivet group lies at the center of the square.
The radial distance from the centroid to each rivet is:
The direct shear force on each rivet due to the vertical load is:
The eccentricity of the load from the centroid is , giving a clockwise moment:
The secondary shear force due to torsion on each rivet is:
For the two rivets on the right side, the secondary shear force acts downward and towards the center, making an angle of with the vertical direct load . The resultant shear force on the worst loaded rivet is:
Answer: 1839.84
Practise Riveted & Bolted Joints
13 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Riveted & Bolted Joints
- GATE 2015 ME Set 3 · Q58A cantilever bracket is bolted to a column using three M12×1.75 bolts P, Q and R. The value of maximum shear…
- GATE 2014 ME Set 2 · Q42For the three bolt system shown in the figure, the bolt material has shear yield strength of 200 MPa. For a…
- GATE 2014 ME Set 4 · Q45A bolt of major diameter 12 mm is required to clamp two steel plates. Cross sectional area of the threaded…
- GATE 2013 ME · Q48Common Data for Questions 48 and 49: A single riveted lap joint of two similar plates as shown in the figure…
- GATE 2013 ME · Q49Common Data for Questions 48 and 49: A single riveted lap joint of two similar plates as shown in the figure…
- GATE 2022 ME Set 1 · Q18A square threaded screw is used to lift a load W by applying a force F. Efficiency of square threaded screw…
Question from the official GATE 2015 ME paper (Set 1), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.