GATE 2020 ME Set 1 · Question 51
The magnitude of reaction force at joint C of the hinge-beam shown in the figure is ________ *(round off to 2 decimal places)*.
GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.41 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
A compound beam with an internal hinge at can be analyzed by separating it into two segments at the hinge because the internal bending moment at the hinge is zero ().
Consider the right-hand segment of length :
- At support , there is a vertical reaction .
- The uniformly distributed load over has an intensity .
- The total downward load on is:
acting at the midpoint of , which is from .
Taking moment of all forces acting on segment about the hinge :
Answer: 20.00
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2019 ME Set 1 · Q48A truss is composed of members AB, BC, CD, AD and BD, as shown in the figure. A vertical load of 10 kN is…
- GATE 2019 ME Set 2 · Q30The figure shows an idealized plane truss. If a horizontal force of 300 N is applied at point A, then the…
- GATE 2016 ME Set 1 · Q41A two-member truss PQR is supporting a load W. The axial forces in members PQ and QR are respectively
- GATE 2016 ME Set 2 · Q44In the figure, the load P = 1 N, length L = 1 m, Young's modulus E = 70 GPa, and the cross-section of the…
- GATE 2015 ME Set 1 · Q26Two identical trusses support a load of 100 N as shown in the figure. The length of each truss is 1.0 m;…
- GATE 2015 ME Set 1 · Q49For the truss shown in figure, the magnitude of the force in member PR and the support reaction at R are…
Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.