GATE 2015 ME Set 1 · Question 49
For the truss shown in figure, the magnitude of the force in member and the support reaction at are respectively
- A
122.47 kN and 50 kN
- B
70.71 kN and 100 kN
- C
70.71 kN and 50 kN
- D
81.65 kN and 100 kN
GATE 2015 · Mechanical Engineering · Set 1 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
From the geometry of the right-angled truss, member is vertical with length .
The external load of at joint acts at to the horizontal. Its components are:
Taking moments about the pinned support for the entire truss:
where is the vertical reaction at the roller support , and the vertical component passes through (). Thus,
At joint , analyzing the equilibrium in the vertical direction:
Answer: (C) 70.71 kN and 50 kN
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2015 ME Set 2 · Q42For the truss shown in the figure, the magnitude of the force (in kN) in the member SR is
- GATE 2014 ME Set 2 · Q17A two member truss ABC is shown in the figure. The force (in kN) transmitted in member AB is _______
- GATE 2014 ME Set 4 · Q16In a statically determinate plane truss, the number of joints (j) and the number of members (m) are related by
- GATE 2014 ME Set 4 · Q42For the truss shown in the figure, the forces F1 and F2 are 9 kN and 3 kN, respectively. The force (in kN)…
- GATE 2012 ME · Q48Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2012 ME · Q49Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
Question from the official GATE 2015 ME paper (Set 1), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.