GATE 2020 ME Set 2 · Question 38
A cantilever of length , and flexural rigidity , stiffened by a spring of stiffness , is loaded by a transverse force , as shown.
The transverse deflection under the load is
- A
- B
- C
- D
GATE 2020 · Mechanical Engineering · Set 2 · IIT Delhi · printed as Q.28 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
Let be the downward transverse deflection at the free end of the cantilever beam under the applied load .
The spring exerts an upward restoring force on the tip of the beam. Thus, the net downward transverse force acting at the tip of the cantilever is:
The tip deflection of a cantilever beam subjected to an end load is given by:
Rearranging the terms to solve for :
Answer: (D)
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2019 ME Set 2 · Q41A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as…
- GATE 2019 ME Set 2 · Q47A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N×m2 is…
- GATE 2016 ME Set 1 · Q19A cantilever beam having square cross-section of side a is subjected to an end load. If a is increased by…
- GATE 2016 ME Set 2 · Q43A simply supported beam of length 2L is subjected to a moment M at the mid-point x = 0 as shown in the…
- GATE 2016 ME Set 3 · Q45A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity of the…
- GATE 2015 ME Set 1 · Q54A cantilever beam with flexural rigidity of 200 N.m2 is loaded as shown in the figure. The deflection (in…
Question from the official GATE 2020 ME paper (Set 2), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.