GATE 2022 ME Set 1 · Question 38
A planar four-bar linkage mechanism with 3 revolute kinematic pairs and 1 prismatic kinematic pair is shown in the figure, where and . The T-shaped link CDEF is constructed such that the slider B can cross the point D, and CE is sufficiently long. For the given lengths as shown, the mechanism is
- A
a Grashof chain with links AG, AB, and CDEF completely rotatable about the ground link FG
- B
a non-Grashof chain with all oscillating links
- C
a Grashof chain with AB completely rotatable about the ground link FG, and oscillatory links AG and CDEF
- D
on the border of Grashof and non-Grashof chains with uncertain configuration(s)
GATE 2022 · Mechanical Engineering · Set 1 · IIT Kharagpur
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
The given mechanism is an inverted slider-crank chain consisting of four links:
1. Ground link FG (fixed, length )
2. Crank AG (pinned at G, length )
3. Coupler AB with slider (length , maintained at )
4. Slotted link CDEF (pinned at F, with offset distance perpendicular to )
For continuous full revolution of the links about the ground link FG, the extreme distances between the pivot G and the line of sliding CE must be checked. Since and , the perpendicular distance between A and the line of sliding is constant ().
Applying the generalized Grashof condition for mechanisms with prismatic pairs, the shortest link can execute complete rotation relative to the adjacent links. Here, the link lengths satisfy the condition for full rotatability of links AG, AB, and CDEF relative to the ground link FG. Therefore, it is a Grashof chain where links AG, AB, and CDEF are completely rotatable about the fixed link FG.
Answer: (A) a Grashof chain with links AG, AB, and CDEF completely rotatable about the ground link FG
Practise Planar Mechanisms, Mobility and Inversions
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Planar Mechanisms, Mobility and Inversions
- GATE 2021 ME Set 1 · Q62The Whitworth quick return mechanism is shown in the figure with link lengths as follows: OP = 300 mm, OA =…
- GATE 2020 ME Set 1 · Q18A four bar mechanism is shown below. For the mechanism to be a crank-rocker mechanism, the length of the…
- GATE 2020 ME Set 2 · Q18The number of qualitatively distinct kinematic inversions possible for a Grashof chain with four revolute…
- GATE 2018 ME Set 1 · Q18For an Oldham coupling used between two shafts, which among the following statements are correct? I.…
- GATE 2018 ME Set 1 · Q30A four bar mechanism is made up of links of length 100, 200, 300 and 350 mm. If the 350 mm link is fixed,…
- GATE 2016 ME Set 3 · Q20The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints is
Question from the official GATE 2022 ME paper (Set 1), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.