GATE 2024 ME · Question 28
The phases present in pearlite are
- A
austenite and ferrite
- B
cementite and austenite
- C
ferrite and cementite
- D
martensite and ferrite
GATE 2024 · Mechanical Engineering · IISc Bangalore
Answer
From the official answer key published by IISc Bangalore.
Worked solution
In the iron-carbon equilibrium phase diagram, pearlite is a two-phase, lamellar (layered) microconstituent formed by the eutectoid transformation of austenite (-iron) upon slow cooling below :
Here, is proeutectoid/eutectoid ferrite (BCC iron) and is cementite (iron carbide). Therefore, the two constituent phases present in pearlite are ferrite and cementite.
Answer: (C) ferrite and cementite
Practise Phase Diagrams and Heat Treatment
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Phase Diagrams and Heat Treatment
- GATE 2023 ME · Q52A steel sample with 1.5 wt.% carbon (no other alloying elements present) is slowly cooled from 1100 °C to…
- GATE 2022 ME Set 1 · Q27Which of the following heat treatment processes is/are used for surface hardening of steels?
- GATE 2022 ME Set 1 · Q41In Fe-Fe3C phase diagram, the eutectoid composition is 0.8 weight % of carbon at 725 °C. The maximum…
- GATE 2022 ME Set 2 · Q19Fluidity of a molten alloy during sand casting depends on its solidification range. The phase diagram of a…
- GATE 2021 ME Set 2 · Q14The Cast Iron which possesses all the carbon in the combined form as cementite is known as
- GATE 2020 ME Set 1 · Q21Match the following. | Heat treatment process | Effect | | :--- | :--- | | P: Tempering | 1. Strengthening |…
Question from the official GATE 2024 ME paper, IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.