GATE 2024 ME · Question 61
Aluminium is casted in a cube-shaped mold having dimensions as . Another mold of the same mold material is used to cast a sphere of aluminium having a diameter of . The pouring temperature for both cases is the same. The ratio of the solidification times of the cube-shaped mold to the spherical mold is _______ *(answer in integer)*.
GATE 2024 · Mechanical Engineering · IISc Bangalore
Answer
From the official answer key published by IISc Bangalore.
Worked solution
According to Chvorinov's rule, the solidification time of a casting is given by:
where is the volume, is the cooling surface area, and is the mold constant (which depends on the mold material, metal properties, and pouring temperature).
For the cube-shaped mold of side :
For the spherical mold of diameter :
Since the mold material, metal, and pouring temperatures are identical, the mold constant is the same for both cases:
Answer: 1
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2023 ME · Q25In a metal casting process to manufacture parts, both patterns and moulds provide shape by dictating where…
- GATE 2022 ME Set 2 · Q27Consider sand casting of a cube of edge length a. A cylindrical riser is placed at the top of the casting.…
- GATE 2021 ME Set 1 · Q46A true centrifugal casting operation needs to be performed horizontally to make copper tube sections with…
- GATE 2021 ME Set 2 · Q47A cast product of a particular material has dimensions 75 mm × 125 mm × 20 mm. The total solidification time…
- GATE 2020 ME Set 2 · Q52A mould cavity of 1200 cm3 volume has to be filled through a sprue of 10 cm length feeding a horizontal…
- GATE 2019 ME Set 1 · Q23In a casting process, a vertical channel through which molten metal flows downward from pouring basin to…
Question from the official GATE 2024 ME paper, IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.