GATE 2023 ME · Question 25
In a metal casting process to manufacture parts, both patterns and moulds provide shape by dictating where the material should or should not go. Which of the option(s) given correctly describe(s) the mould and the pattern?
- A
Mould walls indicate boundaries within which the molten part material is allowed, while pattern walls indicate boundaries of regions where mould material is not allowed.
- B
Moulds can be used to make patterns.
- C
Pattern walls indicate boundaries within which the molten part material is allowed, while mould walls indicate boundaries of regions where mould material is not allowed.
- D
Patterns can be used to make moulds.
GATE 2023 · Mechanical Engineering · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
In casting processes:
1. Mould cavity and pattern geometry: The pattern is a replica of the object to be cast. When moulding material (like sand) is packed around it, the pattern walls define the volume where moulding material cannot enter. Once the pattern is removed, the remaining cavity walls of the mould define the boundary containing the liquid metal. Thus, statement (A) is correct, while (C) is incorrect.
2. Fabrication of moulds using patterns: In conventional sand casting, a pattern is used to impress its shape into the sand to create the mould, making (D) correct.
3. Fabrication of patterns using moulds: In processes such as investment casting, wax or plastic patterns are produced by injecting molten wax into a metal die (mould), making (B) correct.
Answer: (A), (B), (D)
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2022 ME Set 2 · Q27Consider sand casting of a cube of edge length a. A cylindrical riser is placed at the top of the casting.…
- GATE 2021 ME Set 1 · Q46A true centrifugal casting operation needs to be performed horizontally to make copper tube sections with…
- GATE 2021 ME Set 2 · Q47A cast product of a particular material has dimensions 75 mm × 125 mm × 20 mm. The total solidification time…
- GATE 2020 ME Set 2 · Q52A mould cavity of 1200 cm3 volume has to be filled through a sprue of 10 cm length feeding a horizontal…
- GATE 2019 ME Set 1 · Q23In a casting process, a vertical channel through which molten metal flows downward from pouring basin to…
- GATE 2019 ME Set 1 · Q47Match the following sand mold casting defects with their respective causes. | Defect | Cause | | :--- | :---…
Question from the official GATE 2023 ME paper, IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.