GATE 2025 ME · Question 21
The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for automotive applications is
- A
gas welding
- B
laser welding
- C
arc welding
- D
friction welding
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Tailor-welded blanks (TWBs) consist of sheets of different thicknesses, materials, or coatings welded together prior to stamping or forming, primarily in the automotive sector for weight reduction and structural efficiency.
To achieve precise joints with minimal distortion, a high energy-density heat source with a very narrow heat-affected zone (HAZ) is required. Laser beam welding (LBW) offers deep penetration, high welding speeds, low thermal distortion, and high precision, making it the industry standard for fabricating TWBs.
- Conventional arc welding and gas welding cause large heat input, severe thermal distortion, and wide heat-affected zones.
- Friction welding is generally used for axisymmetric or thicker structural parts, not for continuous high-speed edge butt welding of thin automotive sheet blanks.
Answer: (B) laser welding
Practise Welding II: Resistance Welding, Solid-State Joining and Allied Processes
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Welding II: Resistance Welding, Solid-State Joining and Allied Processes
- GATE 2023 ME · Q23Two surfaces P and Q are to be joined together. In which of the given joining operation(s), there is no…
- GATE 2021 ME Set 1 · Q47The resistance spot welding of two 1.55 mm thick metal sheets is performed using welding current of 10000 A…
- GATE 2021 ME Set 2 · Q48A spot welding operation performed on two pieces of steel yielded a nugget with a diameter of 5 mm and a…
- GATE 2019 ME Set 1 · Q24Which one of the following welding methods provides the highest heat flux (W/mm2)?
- GATE 2016 ME Set 1 · Q31Under optimal conditions of the process the temperatures experienced by a copper work piece in fusion…
- GATE 2016 ME Set 3 · Q58Spot welding of two steel sheets each 2 mm thick is carried out successfully by passing 4 kA of current for…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.