GATE 2016 ME Set 1 · Question 31
Under optimal conditions of the process the temperatures experienced by a copper work piece in fusion welding, brazing and soldering are such that
- A
- B
- C
- D
GATE 2016 · Mechanical Engineering · Set 1 · IISc Bangalore · printed as Q.21 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
In metal joining processes:
1. Fusion Welding: The base metal must be melted to form the joint. For copper, its melting point is approximately , so .
2. Brazing: The base metal does not melt. The filler metal has a liquidus temperature above but below the melting temperature of the base metal (typically to for copper alloys).
3. Soldering: The base metal does not melt, and the filler metal (solder) has a liquidus temperature below (commonly around to for tin-lead or lead-free solders).
Comparing the process temperatures:
Answer: (D)
Practise Welding II: Resistance Welding, Solid-State Joining and Allied Processes
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Welding II: Resistance Welding, Solid-State Joining and Allied Processes
- GATE 2016 ME Set 3 · Q58Spot welding of two steel sheets each 2 mm thick is carried out successfully by passing 4 kA of current for…
- GATE 2015 ME Set 3 · Q31Which two of the following joining processes are autogeneous? (i) Diffusion welding (ii) Electroslag welding…
- GATE 2014 ME Set 1 · Q35In solid-state welding, the contamination layers between the surfaces to be welded are removed by
- GATE 2014 ME Set 3 · Q65For spot welding of two steel sheets (base metal) each of 3 mm thickness, welding current of 10000 A is…
- GATE 2013 ME · Q11Match the CORRECT pairs. | Processes | Characteristics / Applications | | :--- | :--- | | P. Friction…
- GATE 2025 ME · Q21The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for…
Question from the official GATE 2016 ME paper (Set 1), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.