GATE 2025 ME · Question 20
Among the following surface hardening processes, steel is heated to the lowest temperature in
- A
carburizing
- B
cyaniding
- C
nitriding
- D
carbonitriding
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
The typical processing temperatures for the given thermochemical surface-hardening treatments of steel are:
- Carburizing: Conducted in the austenitic range, typically between and .
- Cyaniding: Typically carried out in a molten salt bath between and .
- Carbonitriding: An austenitic diffusion process conducted between and .
- Nitriding: Conducted in the ferritic region (below the eutectoid temperature ), typically between and .
Because nitriding occurs in the ferritic state without phase transformation, it requires the lowest temperature among the options, which also minimizes thermal distortion and cracking.
Answer: (C) nitriding
Practise Phase Diagrams and Heat Treatment
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Phase Diagrams and Heat Treatment
- GATE 2024 ME · Q28The phases present in pearlite are
- GATE 2023 ME · Q52A steel sample with 1.5 wt.% carbon (no other alloying elements present) is slowly cooled from 1100 °C to…
- GATE 2022 ME Set 1 · Q27Which of the following heat treatment processes is/are used for surface hardening of steels?
- GATE 2022 ME Set 1 · Q41In Fe-Fe3C phase diagram, the eutectoid composition is 0.8 weight % of carbon at 725 °C. The maximum…
- GATE 2022 ME Set 2 · Q19Fluidity of a molten alloy during sand casting depends on its solidification range. The phase diagram of a…
- GATE 2021 ME Set 2 · Q14The Cast Iron which possesses all the carbon in the combined form as cementite is known as
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.