GATE 2012 ME · Question 18
Which one of the following configurations has the highest fin effectiveness?
- A
Thin, closely spaced fins
- B
Thin, widely spaced fins
- C
Thick, widely spaced fins
- D
Thick, closely spaced fins
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
Fin effectiveness is defined as the ratio of the fin heat transfer rate to the heat transfer rate that would exist without the fin from the same base area:
For an infinitely long or very long fin, this simplifies to:
For plate fins of thickness and width with , the perimeter is and the cross-sectional area is . Thus:
Hence, thinner fins yield a higher effectiveness. Furthermore, closely spacing the fins packs more heat transfer surface per unit volume and results in smaller convective heat transfer coefficients due to boundary layer interaction, which further increases the fin effectiveness (since ). Therefore, thin, closely spaced fins provide the highest fin effectiveness.
Answer: (A)
Practise Heat Transfer from Extended Surfaces (Fins)
4 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Transfer from Extended Surfaces (Fins)
- GATE 2026 ME · Q43A very long fin of a uniform square cross-section is replaced by another very long fin of a uniform circular…
- GATE 2021 ME Set 1 · Q24An infinitely long pin fin, attached to an isothermal hot surface, transfers heat at a steady rate of Q1 to…
- GATE 2017 ME Set 2 · Q18The heat loss from a fin is 6 W. The effectiveness and efficiency of the fin are 3 and 0.75, respectively.…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.