GATE 2013 ME · Question 18
In order to have maximum power from a Pelton turbine, the bucket speed must be
- A
equal to the jet speed.
- B
equal to half of the jet speed.
- C
equal to twice the jet speed.
- D
independent of the jet speed.
GATE 2013 · Mechanical Engineering · IIT Bombay
Answer
From the official answer key published by IIT Bombay.
Worked solution
The hydraulic efficiency of a Pelton wheel is given by:
where is the absolute velocity of the jet, is the tangential blade (bucket) speed, is the blade friction factor, and is the bucket outlet angle.
To find the condition for maximum power or efficiency, differentiate the power expression with respect to and set it to zero:
Thus, maximum power is obtained when the bucket speed is equal to half of the jet speed.
Answer: (B) equal to half of the jet speed.
Practise Hydraulic Turbines (Pelton, Francis, Kaplan)
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydraulic Turbines (Pelton, Francis, Kaplan)
- GATE 2026 ME · Q58An inward flow reaction turbine, having an outer diameter of 1 m, runs at 600 RPM. The normal component of…
- GATE 2025 ME · Q53Consider a Pelton wheel of 1 m diameter. The magnitude of relative velocity of water at the bucket inlet is…
- GATE 2021 ME Set 1 · Q58A single jet Pelton wheel operates at 300 rpm. The mean diameter of the wheel is 2 m. Operating head and…
- GATE 2021 ME Set 2 · Q59A vertical shaft Francis turbine rotates at 300 rpm. The available head at the inlet to the turbine is 200…
- GATE 2020 ME Set 1 · Q64For a Kaplan (axial flow) turbine, the outlet blade velocity diagram at a section is shown in figure. The…
- GATE 2019 ME Set 1 · Q20As per common design practice, the three types of hydraulic turbines, in descending order of flow rate, are
Question from the official GATE 2013 ME paper, IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.