GATE 2021 ME Set 1 · Question 58
A single jet Pelton wheel operates at . The mean diameter of the wheel is . Operating head and dimensions of jet are such that water comes out of the jet with a velocity of and flow rate of . The jet is deflected by the bucket at an angle of . Neglecting all losses, the power developed by the Pelton wheel is ________ *(round off to two decimal places)*.
GATE 2021 · Mechanical Engineering · Set 1 · IIT Bombay · printed as Q.48 in the ME section
Answer
From the official answer key published by IIT Bombay.
Worked solution
The peripheral velocity of the Pelton wheel bucket is:
Given the jet velocity , the relative velocity at inlet is:
Since all losses are neglected, the relative velocity at exit is . The bucket deflection angle is , so the blade angle at exit is .
The change in the whirl velocity across the bucket is:
The mass flow rate of water is:
The power developed by the wheel is:
Answer: 2.65
Practise Hydraulic Turbines (Pelton, Francis, Kaplan)
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydraulic Turbines (Pelton, Francis, Kaplan)
- GATE 2021 ME Set 2 · Q59A vertical shaft Francis turbine rotates at 300 rpm. The available head at the inlet to the turbine is 200…
- GATE 2020 ME Set 1 · Q64For a Kaplan (axial flow) turbine, the outlet blade velocity diagram at a section is shown in figure. The…
- GATE 2019 ME Set 1 · Q20As per common design practice, the three types of hydraulic turbines, in descending order of flow rate, are
- GATE 2018 ME Set 1 · Q34For a Pelton wheel with a given water jet velocity, the maximum output power from the Pelton wheel is…
- GATE 2014 ME Set 4 · Q26Kaplan water turbine is commonly used when the flow through its runner is
- GATE 2013 ME · Q18In order to have maximum power from a Pelton turbine, the bucket speed must be
Question from the official GATE 2021 ME paper (Set 1), IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.