GATE 2019 ME Set 1 · Question 20
As per common design practice, the three types of hydraulic turbines, in descending order of flow rate, are
- A
Kaplan, Francis, Pelton
- B
Pelton, Francis, Kaplan
- C
Francis, Kaplan, Pelton
- D
Pelton, Kaplan, Francis
GATE 2019 · Mechanical Engineering · Set 1 · IIT Madras · printed as Q.10 in the ME section
Answer
From the official answer key published by IIT Madras.
Worked solution
Hydraulic turbines are classified primarily by their operating head () and discharge/flow rate ():
- Kaplan turbine: An axial flow reaction turbine operating at low head () and very high flow rate.
- Francis turbine: A mixed flow reaction turbine operating at medium head () and medium flow rate.
- Pelton wheel: A tangential impulse turbine operating at high head () and low flow rate.
Thus, the descending order of flow rate is Kaplan > Francis > Pelton.
Answer: (A) Kaplan, Francis, Pelton
Practise Hydraulic Turbines (Pelton, Francis, Kaplan)
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydraulic Turbines (Pelton, Francis, Kaplan)
- GATE 2018 ME Set 1 · Q34For a Pelton wheel with a given water jet velocity, the maximum output power from the Pelton wheel is…
- GATE 2014 ME Set 4 · Q26Kaplan water turbine is commonly used when the flow through its runner is
- GATE 2013 ME · Q18In order to have maximum power from a Pelton turbine, the bucket speed must be
- GATE 2026 ME · Q58An inward flow reaction turbine, having an outer diameter of 1 m, runs at 600 RPM. The normal component of…
- GATE 2025 ME · Q53Consider a Pelton wheel of 1 m diameter. The magnitude of relative velocity of water at the bucket inlet is…
- GATE 2021 ME Set 1 · Q58A single jet Pelton wheel operates at 300 rpm. The mean diameter of the wheel is 2 m. Operating head and…
Question from the official GATE 2019 ME paper (Set 1), IIT Madras. Solutions by PARIXO AI. All 65 questions of this paper.