GATE 2015 ME Set 3 · Question 13
A gear train is made up of five spur gears as shown in the figure. Gear 2 is driver and gear 6 is driven member. , , , and represent number of teeth on gears 2, 3, 4, 5, and 6 respectively. The gear(s) which act(s) as idler(s) is/are
- A
Only 3
- B
Only 4
- C
Only 5
- D
Both 3 and 5
GATE 2015 · Mechanical Engineering · Set 3 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
An idler gear is an intermediate gear that does not affect the overall speed ratio of the gear train, but only changes the direction of rotation or bridges the center distance.
From the gear layout:
- Gear 2 (driver) meshes with gear 3.
- Gear 3 and gear 4 are rigidly mounted on the same shaft, forming a compound gear, so .
- Gear 4 meshes with gear 5.
- Gear 5 meshes with gear 6 (driven).
The overall gear ratio (train value) is:
Notice that the number of teeth cancels out from the speed ratio expression, while and both determine the magnitude of the velocity ratio. Therefore, gear 5 serves only to transfer motion and reverse the direction of rotation, making it an idler gear. Gears 3 and 4 form a compound gear unit, so neither is an idler.
Answer: (C) Only 5
Practise Gears and Gear Trains
20 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Gears and Gear Trains
- GATE 2014 ME Set 3 · Q21Gear 2 rotates at 1200 rpm in counter clockwise direction and engages with Gear 3. Gear 3 and Gear 4 are…
- GATE 2014 ME Set 4 · Q18Which one of the following is used to convert a rotational motion into a translational motion?
- GATE 2014 ME Set 4 · Q43It is desired to avoid interference in a pair of spur gears having a 20° pressure angle. With increase in…
- GATE 2013 ME · Q32A compound gear train with gears P, Q, R and S has number of teeth 20, 40, 15 and 20, respectively. Gears Q…
- GATE 2012 ME · Q8The following are the data for two crossed helical gears used for speed reduction: Gear I : Pitch circle…
- GATE 2026 ME · Q17A gear train with five gears is shown in the figure below. The number of teeth on each gear is N1, N2, N3,…
Question from the official GATE 2015 ME paper (Set 3), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.