GATE 2017 ME Set 1 · Question 22
Match the processes with their characteristics.
| Process | Characteristics |
| :--- | :--- |
| P: Electrical Discharge Machining | 1. No residual stress |
| Q: Ultrasonic machining | 2. Machining of electrically conductive materials |
| R: Chemical machining | 3. Machining of glass |
| S: Ion Beam Machining | 4. Nano-machining |
- A
P-2, Q-3, R-1, S-4
- B
P-3, Q-2, R-1, S-4
- C
P-3, Q-2, R-4, S-1
- D
P-2, Q-4, R-3, S-1
GATE 2017 · Mechanical Engineering · Set 1 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Let us match each non-conventional machining process with its unique characteristic:
- P. Electrical Discharge Machining (EDM): Relies on thermoelectric erosion generated by high-frequency spark discharges between an electrode and workpiece; it requires the workpiece to be an electrically conductive material (2).
- Q. Ultrasonic Machining (USM): Removes material via abrasive micro-chipping driven by high-frequency mechanical vibrations, making it well-suited for hard, brittle, non-metallic materials such as glass and ceramics (3).
- R. Chemical Machining (CHM): Employs chemical etchants to dissolve material atom by atom without mechanical forces or thermal effects, resulting in no residual stress (1).
- S. Ion Beam Machining (IBM): Utilizes accelerated ion streams in a vacuum for atomic sputtering, widely used in nano-machining and sub-micron surface patterning (4).
Therefore, the correct matching is P-2, Q-3, R-1, S-4.
Answer: (A) P-2, Q-3, R-1, S-4
Practise Non-Traditional Machining (NTM) Processes
23 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Non-Traditional Machining (NTM) Processes
- GATE 2017 ME Set 2 · Q20Which one of the following statements is TRUE for the ultrasonic machining (USM) process?
- GATE 2016 ME Set 1 · Q33The non-traditional machining process that essentially requires vacuum is
- GATE 2016 ME Set 2 · Q35In an ultrasonic machining (USM) process, the material removal rate (MRR) is plotted as a function of the…
- GATE 2016 ME Set 2 · Q62The surface irregularities of electrodes used in an electrochemical machining (ECM) process are 3 μm and 6…
- GATE 2016 ME Set 3 · Q32In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut are that
- GATE 2015 ME Set 2 · Q31The primary mechanism of material removal in electrochemical machining (ECM) is
Question from the official GATE 2017 ME paper (Set 1), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.