GATE 2018 ME Set 1 · Question 34
For a Pelton wheel with a given water jet velocity, the maximum output power from the Pelton wheel is obtained when the ratio of the bucket speed to the water jet speed is ________ (correct to two decimal places).
GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.24 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
The hydraulic efficiency of a Pelton wheel is given by:
where is the jet velocity, is the bucket speed, is the blade friction factor, and is the bucket outlet angle.
To find the condition for maximum output power (and maximum efficiency) for a given jet velocity, differentiate the work output per unit mass with respect to and set it to zero:
In practical installations, due to friction and other losses, the speed ratio typically ranges between and , but theoretically, it is .
Answer: 0.50
Practise Hydraulic Turbines (Pelton, Francis, Kaplan)
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydraulic Turbines (Pelton, Francis, Kaplan)
- GATE 2014 ME Set 4 · Q26Kaplan water turbine is commonly used when the flow through its runner is
- GATE 2013 ME · Q18In order to have maximum power from a Pelton turbine, the bucket speed must be
- GATE 2026 ME · Q58An inward flow reaction turbine, having an outer diameter of 1 m, runs at 600 RPM. The normal component of…
- GATE 2025 ME · Q53Consider a Pelton wheel of 1 m diameter. The magnitude of relative velocity of water at the bucket inlet is…
- GATE 2021 ME Set 1 · Q58A single jet Pelton wheel operates at 300 rpm. The mean diameter of the wheel is 2 m. Operating head and…
- GATE 2021 ME Set 2 · Q59A vertical shaft Francis turbine rotates at 300 rpm. The available head at the inlet to the turbine is 200…
Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.