GATE 2020 ME Set 2 · Question 27
For an air-standard Diesel cycle,
- A
heat addition is at constant volume and heat rejection is at constant pressure
- B
heat addition is at constant pressure and heat rejection is at constant pressure
- C
heat addition is at constant pressure and heat rejection is at constant volume
- D
heat addition is at constant volume and heat rejection is at constant volume
GATE 2020 · Mechanical Engineering · Set 2 · IIT Delhi · printed as Q.17 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
The ideal air-standard Diesel cycle consists of four internally reversible processes:
1. : Isentropic compression
2. : Constant pressure heat addition ()
3. : Isentropic expansion
4. : Constant volume heat rejection ()
In contrast, the Otto cycle adds heat at constant volume, while the Brayton cycle rejects heat at constant pressure. Thus, for a Diesel cycle, heat is added at constant pressure and rejected at constant volume.
Answer: (C) heat addition is at constant pressure and heat rejection is at constant volume
Practise Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
- GATE 2020 ME Set 2 · Q65Keeping all other parameters identical, the Compression Ratio (CR) of an air standard diesel cycle is…
- GATE 2019 ME Set 2 · Q59An air standard Otto cycle has thermal efficiency of 0.5 and the mean effective pressure of the cycle is…
- GATE 2018 ME Set 1 · Q56An engine working on air standard Otto cycle is supplied with air at 0.1 MPa and 35°C. The compression ratio…
- GATE 2018 ME Set 2 · Q65A vehicle powered by a spark ignition engine follows air standard Otto cycle (γ=1.4). The engine generates…
- GATE 2015 ME Set 1 · Q21Air enters a diesel engine with a density of 1.0 kg/m3. The compression ratio is 21. At steady state, the…
- GATE 2015 ME Set 2 · Q56For the same values of peak pressure, peak temperature and heat rejection, the correct order of efficiencies…
Question from the official GATE 2020 ME paper (Set 2), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.