GATE 2020 ME Set 2 · Question 65
Keeping all other parameters identical, the Compression Ratio (CR) of an air standard diesel cycle is increased from 15 to 21. Take ratio of specific heats = 1.3 and cut-off ratio of the cycle .
The difference between the new and the old efficiency values, in percentage,
*(round off to one decimal place)*.
GATE 2020 · Mechanical Engineering · Set 2 · IIT Delhi · printed as Q.55 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
The thermal efficiency of an air-standard Diesel cycle is given by:
Given and cut-off ratio , we calculate the cut-off factor :
For compression ratio :
For compression ratio :
The difference in efficiency in percentage is:
Answer: 4.8
Practise Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
- GATE 2019 ME Set 2 · Q59An air standard Otto cycle has thermal efficiency of 0.5 and the mean effective pressure of the cycle is…
- GATE 2018 ME Set 1 · Q56An engine working on air standard Otto cycle is supplied with air at 0.1 MPa and 35°C. The compression ratio…
- GATE 2018 ME Set 2 · Q65A vehicle powered by a spark ignition engine follows air standard Otto cycle (γ=1.4). The engine generates…
- GATE 2015 ME Set 1 · Q21Air enters a diesel engine with a density of 1.0 kg/m3. The compression ratio is 21. At steady state, the…
- GATE 2015 ME Set 2 · Q56For the same values of peak pressure, peak temperature and heat rejection, the correct order of efficiencies…
- GATE 2015 ME Set 3 · Q35An air-standard Diesel cycle consists of the following processes: 1-2: Air is compressed isentropically.…
Question from the official GATE 2020 ME paper (Set 2), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.