GATE 2018 ME Set 1 · Question 56
An engine working on air standard Otto cycle is supplied with air at and . The compression ratio is 8. The heat supplied is . Property data for air: , , . The maximum temperature (in ) of the cycle is ______ (correct to one decimal place).
GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.46 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
For the Otto cycle, the temperature at the beginning of compression is:
The adiabatic index is:
For the isentropic compression process with compression ratio :
Heat is added at constant volume (), leading to the maximum cycle temperature :
(Using yields .)
Answer: 1404.1
Practise Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Air-Standard IC Engine Cycles (Otto, Diesel, Dual)
- GATE 2018 ME Set 2 · Q65A vehicle powered by a spark ignition engine follows air standard Otto cycle (γ=1.4). The engine generates…
- GATE 2015 ME Set 1 · Q21Air enters a diesel engine with a density of 1.0 kg/m3. The compression ratio is 21. At steady state, the…
- GATE 2015 ME Set 2 · Q56For the same values of peak pressure, peak temperature and heat rejection, the correct order of efficiencies…
- GATE 2015 ME Set 3 · Q35An air-standard Diesel cycle consists of the following processes: 1-2: Air is compressed isentropically.…
- GATE 2014 ME Set 1 · Q57In an air-standard Otto cycle, air is supplied at 0.1 MPa and 308 K. The ratio of the specific heats (γ) and…
- GATE 2014 ME Set 3 · Q59A diesel engine has a compression ratio of 17 and cut-off takes place at 10% of the stroke. Assuming ratio…
Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.