GATE 2024 ME · Question 57
The figure shows a thin cylindrical pressure vessel constructed by welding plates together along a line that makes an angle with the horizontal. The closed vessel has a wall thickness of and diameter of . When subjected to an internal pressure of , the magnitude of the normal stress acting on the weld is _____________ *(rounded off to 1 decimal place)*.
GATE 2024 · Mechanical Engineering · IISc Bangalore
Answer
From the official answer key published by IISc Bangalore.
Worked solution
For a thin cylindrical pressure vessel of internal diameter , wall thickness , and internal pressure :
- Circumferential (hoop) stress:
- Longitudinal (axial) stress:
The weld line makes an angle with the longitudinal axis (horizontal). The normal to the weld line therefore makes an angle with the longitudinal axis.
The normal stress acting on the weld plane is given by the stress transformation formula:
Answer: 12.5
Practise Thin Pressure Vessels
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Thin Pressure Vessels
- GATE 2023 ME · Q40The figure shows a thin-walled open-top cylindrical vessel of radius r and wall thickness t. The vessel is…
- GATE 2022 ME Set 1 · Q52A thin-walled cylindrical pressure vessel has mean wall thickness of t and nominal radius of r. The…
- GATE 2018 ME Set 2 · Q47A thin-walled cylindrical can with rigid end caps has a mean radius R = 100 mm and a wall thickness of t = 5…
- GATE 2016 ME Set 2 · Q18A thin cylindrical pressure vessel with closed-ends is subjected to internal pressure. The ratio of…
- GATE 2015 ME Set 2 · Q18A gas is stored in a cylindrical tank of inner radius 7 m and wall thickness 50 mm. The gage pressure of the…
- GATE 2015 ME Set 3 · Q27A cylindrical tank with closed ends is filled with compressed air at a pressure of 500 kPa. The inner radius…
Question from the official GATE 2024 ME paper, IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.