GATE 2025 ME · Question 58
An isotropic brittle material is tested in the universal testing machine. The stress-strain diagram for the material shows a bi-linear elastic behavior as shown in the figure given below. The strain energy density is ________ (*rounded off to 2 decimal places*).
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
The strain energy density is the total strain energy per unit volume, which equals the area under the stress-strain curve up to fracture.
The diagram consists of two linear segments:
1. A triangular region from to :
2. A trapezoidal region from to :
The total strain energy density is:
Answer: 1.05
Practise Energy Methods and Theories of Failure
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Energy Methods and Theories of Failure
- GATE 2023 ME · Q26The principal stresses at a point P in a solid are 70 MPa, -70 MPa and 0. The yield stress of the material…
- GATE 2023 ME · Q59A cylindrical bar has a length L = 5 m and cross section area S = 10 m2. The bar is made of a linear elastic…
- GATE 2022 ME Set 1 · Q37An L-shaped elastic member ABC with slender arms AB and BC of uniform cross-section is clamped at end A and…
- GATE 2022 ME Set 2 · Q18A structural member under loading has a uniform state of plane stress which in usual notations is given by…
- GATE 2021 ME Set 2 · Q27The von Mises stress at a point in a body subjected to forces is proportional to the square root of the
- GATE 2021 ME Set 2 · Q41A plane frame PQR (fixed at P and free at R) is shown in the figure. Both members (PQ and QR) have length,…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.