GATE 2012 ME · Question 26
The homogeneous state of stress for a metal part undergoing plastic deformation is
where the stress component values are in . Using von Mises yield criterion, the value of estimated shear yield stress, in is
- A
9.50
- B
16.07
- C
28.52
- D
49.41
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
According to the von Mises yield criterion, the second invariant of the deviatoric stress tensor is related to the shear yield stress by:
Alternatively, in terms of stress components:
Given the stress tensor:
Substitute these values:
Thus, the estimated shear yield stress is:
Answer: (B)
Practise Energy Methods and Theories of Failure
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Energy Methods and Theories of Failure
- GATE 2026 ME · Q34A steel plate having yield strength of 550 MPa, is subjected to biaxial state of stress as σx = σ and σy =…
- GATE 2025 ME · Q22The yield stress of a metal in uniaxial tension is 200 MPa. According to von Mises yield criterion, the…
- GATE 2025 ME · Q58An isotropic brittle material is tested in the universal testing machine. The stress-strain diagram for the…
- GATE 2023 ME · Q26The principal stresses at a point P in a solid are 70 MPa, -70 MPa and 0. The yield stress of the material…
- GATE 2023 ME · Q59A cylindrical bar has a length L = 5 m and cross section area S = 10 m2. The bar is made of a linear elastic…
- GATE 2022 ME Set 1 · Q37An L-shaped elastic member ABC with slender arms AB and BC of uniform cross-section is clamped at end A and…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.