GATE 2013 ME · Question 11
Match the CORRECT pairs.
| Processes | Characteristics / Applications |
| :--- | :--- |
| P. Friction Welding | 1. Non-consumable electrode |
| Q. Gas Metal Arc Welding | 2. Joining of thick plates |
| R. Tungsten Inert Gas Welding | 3. Consumable electrode wire |
| S. Electroslag Welding | 4. Joining of cylindrical dissimilar materials |
- A
P-4, Q-3, R-1, S-2
- B
P-4, Q-2, R-3, S-1
- C
P-2, Q-3, R-4, S-1
- D
P-2, Q-4, R-1, S-3
GATE 2013 · Mechanical Engineering · IIT Bombay
Answer
From the official answer key published by IIT Bombay.
Worked solution
We match each welding process to its distinctive characteristic or primary application:
- P. Friction Welding: A solid-state welding process utilizing mechanical friction; widely used for joining cylindrical components, especially of dissimilar metals (4).
- Q. Gas Metal Arc Welding (GMAW/MIG): Uses a continuously fed consumable electrode wire shielded by an externally supplied inert or active gas (3).
- R. Tungsten Inert Gas Welding (TIG/GTAW): Employs a non-consumable tungsten electrode to establish the arc (1).
- S. Electroslag Welding (ESW): A single-pass vertical process highly effective for the joining of very thick plates (typically ) (2).
Therefore, the correct pairing is P-4, Q-3, R-1, S-2.
Answer: (A) P-4, Q-3, R-1, S-2
Practise Welding II: Resistance Welding, Solid-State Joining and Allied Processes
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Welding II: Resistance Welding, Solid-State Joining and Allied Processes
- GATE 2025 ME · Q21The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for…
- GATE 2023 ME · Q23Two surfaces P and Q are to be joined together. In which of the given joining operation(s), there is no…
- GATE 2021 ME Set 1 · Q47The resistance spot welding of two 1.55 mm thick metal sheets is performed using welding current of 10000 A…
- GATE 2021 ME Set 2 · Q48A spot welding operation performed on two pieces of steel yielded a nugget with a diameter of 5 mm and a…
- GATE 2019 ME Set 1 · Q24Which one of the following welding methods provides the highest heat flux (W/mm2)?
- GATE 2016 ME Set 1 · Q31Under optimal conditions of the process the temperatures experienced by a copper work piece in fusion…
Question from the official GATE 2013 ME paper, IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.