GATE 2016 ME Set 1 · Question 46
In the gear train shown, gear 3 is carried on arm 5. Gear 3 meshes with gear 2 and gear 4. The number of teeth on gear 2, 3, and 4 are 60, 20, and 100, respectively. If gear 2 is fixed and gear 4 rotates with an angular velocity of 100 rpm in the counterclockwise direction, the angular speed of arm 5 (in rpm) is
- A
166.7 counterclockwise
- B
166.7 clockwise
- C
62.5 counterclockwise
- D
62.5 clockwise
GATE 2016 · Mechanical Engineering · Set 1 · IISc Bangalore · printed as Q.36 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
Let the counterclockwise (CCW) direction be positive (). Gear 4 is an internal gear enclosing planet gear 3, which meshes externally with sun gear 2.
Let the angular speed of arm 5 be .
With the arm fixed, let gear 2 rotate at rpm.
Since gear 3 meshes externally with gear 2:
Gear 4 meshes internally with gear 3, so both gears rotate in the same direction relative to the arm:
Given that gear 2 is fixed ():
Substitute into the equation for :
Given (CCW):
The positive sign indicates counterclockwise rotation.
Answer: (C) 62.5 counterclockwise
Practise Gears and Gear Trains
20 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Gears and Gear Trains
- GATE 2015 ME Set 1 · Q51A pinion with radius r1, and inertia I1 is driving a gear with radius r2 and inertia I2. Torque τ1 is…
- GATE 2015 ME Set 3 · Q13A gear train is made up of five spur gears as shown in the figure. Gear 2 is driver and gear 6 is driven…
- GATE 2014 ME Set 3 · Q21Gear 2 rotates at 1200 rpm in counter clockwise direction and engages with Gear 3. Gear 3 and Gear 4 are…
- GATE 2014 ME Set 4 · Q18Which one of the following is used to convert a rotational motion into a translational motion?
- GATE 2014 ME Set 4 · Q43It is desired to avoid interference in a pair of spur gears having a 20° pressure angle. With increase in…
- GATE 2013 ME · Q32A compound gear train with gears P, Q, R and S has number of teeth 20, 40, 15 and 20, respectively. Gears Q…
Question from the official GATE 2016 ME paper (Set 1), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.