GATE 2018 ME Set 1 · Question 40
An epicyclic gear train is shown in the figure below. The number of teeth on the gears A, B and D are 20, 30 and 20, respectively. Gear C has 80 teeth on the inner surface and 100 teeth on the outer surface. If the carrier arm AB is fixed and the sun gear A rotates at in the clockwise direction, then the rpm of D in the clockwise direction is
- A
- B
- C
- D
GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.30 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
The carrier arm AB is fixed, so the system behaves as a fixed-axis gear train. Let clockwise rotation be taken as positive.
Given:
- , , , ,
Gear A meshes externally with planet gear B:
Gear B meshes internally with the inner ring of gear C:
Multiplying the two ratios:
Gear D meshes externally with the outer teeth of gear C:
Thus, gear D rotates at in the clockwise direction.
Answer: (C)
Practise Gears and Gear Trains
20 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Gears and Gear Trains
- GATE 2018 ME Set 2 · Q16A frictionless gear train is shown in the figure. The leftmost 12-teeth gear is given a torque of 100 N-m.…
- GATE 2017 ME Set 1 · Q45In an epicyclic gear train, shown in the figure, the outer ring gear is fixed, while the sun gear rotates…
- GATE 2017 ME Set 2 · Q32A gear train shown in the figure consists of gears P, Q, R and S. Gear Q and gear R are mounted on the same…
- GATE 2016 ME Set 1 · Q46In the gear train shown, gear 3 is carried on arm 5. Gear 3 meshes with gear 2 and gear 4. The number of…
- GATE 2015 ME Set 1 · Q51A pinion with radius r1, and inertia I1 is driving a gear with radius r2 and inertia I2. Torque τ1 is…
- GATE 2015 ME Set 3 · Q13A gear train is made up of five spur gears as shown in the figure. Gear 2 is driver and gear 6 is driven…
Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.