GATE 2018 ME Set 2 · Question 64
Steam in the condenser of a thermal power plant is to be condensed at a temperature of with cooling water which enters the tubes of the condenser at and exits at . The total surface area of the tubes is , and the overall heat transfer coefficient is . The heat transfer (in MW) to the condenser is ________ (correct to two decimal places).
GATE 2018 · Mechanical Engineering · Set 2 · IIT Guwahati · printed as Q.54 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
In a condenser, steam condenses at a constant temperature . The cooling water temperatures are and .
The temperature differences at the two ends are:
The logarithmic mean temperature difference (LMTD) is:
The total heat transfer rate to the condenser is:
Answer: 1.15
Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Exchangers: LMTD & Effectiveness-NTU Methods
- GATE 2017 ME Set 1 · Q10Saturated steam at 100°C condenses on the outside of a tube. Cold fluid enters the tube at 20 °C and exits…
- GATE 2017 ME Set 2 · Q46In a counter-flow heat exchanger, water is heated at the rate of 1.5 kg/s from 40 °C to 80 °C by an oil…
- GATE 2016 ME Set 2 · Q52Consider a parallel-flow heat exchanger with area Ap and a counter-flow heat exchanger with area Ac. In both…
- GATE 2016 ME Set 3 · Q28For a heat exchanger, Δ T is the maximum temperature difference and Δ T is the minimum temperature…
- GATE 2015 ME Set 2 · Q52A balanced counterflow heat exchanger has a surface area of 20 m2 and overall heat transfer coefficient of…
- GATE 2015 ME Set 3 · Q22Saturated vapor is condensed to saturated liquid in a condenser. The heat capacity ratio is Cr = C C . The…
Question from the official GATE 2018 ME paper (Set 2), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.