GATE 2017 ME Set 2 · Question 36
A single-plate clutch has a friction disc with inner and outer radii of and , respectively. The friction lining in the disc is made in such a way that the coefficient of friction varies radially as , where is in mm. The clutch needs to transmit a friction torque of . As per uniform pressure theory, the pressure (in MPa) on the disc is ________
GATE 2017 · Mechanical Engineering · Set 2 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Under the uniform pressure theory, the contact pressure across the disc is constant. Consider an elemental annular ring of radius and width .
The normal force on the element is
The friction torque for one active friction surface is
Integrating from the inner radius to outer radius :
Given :
Answer: 0.5
Practise Brakes & Clutches
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Brakes & Clutches
- GATE 2016 ME Set 2 · Q19The forces F1 and F2 in a brake band and the direction of rotation of the drum are as shown in the figure.…
- GATE 2016 ME Set 2 · Q22For the brake shown in the figure, which one of the following is TRUE?
- GATE 2014 ME Set 2 · Q45A disc clutch with a single friction surface has coefficient of friction equal to 0.3. The maximum pressure…
- GATE 2014 ME Set 3 · Q40A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of…
- GATE 2012 ME · Q44A force of 400 N is applied to the brake drum of 0.5 m diameter in a band-brake system as shown in the…
- GATE 2024 ME · Q59A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of…
Question from the official GATE 2017 ME paper (Set 2), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.