GATE 2019 ME Set 2 · Question 56
Hot and cold fluids enter a parallel flow double tube heat exchanger at and , respectively. The heat capacity rates of hot and cold fluids are and , respectively. If the outlet temperature of the cold fluid is , the log mean temperature difference (LMTD) of the heat exchanger is _____ (round off to two decimal places).
GATE 2019 · Mechanical Engineering · Set 2 · IIT Madras · printed as Q.46 in the ME section
Answer
From the official answer key published by IIT Madras.
Worked solution
For a heat exchanger, the heat lost by the hot fluid equals the heat gained by the cold fluid:
Substituting the given values:
The outlet temperature of the hot fluid is:
For a parallel flow heat exchanger, the temperature differences at the inlet and outlet are:
The log mean temperature difference (LMTD) is:
Answer: 57.71
Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Exchangers: LMTD & Effectiveness-NTU Methods
- GATE 2018 ME Set 2 · Q64Steam in the condenser of a thermal power plant is to be condensed at a temperature of 30°C with cooling…
- GATE 2017 ME Set 1 · Q10Saturated steam at 100°C condenses on the outside of a tube. Cold fluid enters the tube at 20 °C and exits…
- GATE 2017 ME Set 2 · Q46In a counter-flow heat exchanger, water is heated at the rate of 1.5 kg/s from 40 °C to 80 °C by an oil…
- GATE 2016 ME Set 2 · Q52Consider a parallel-flow heat exchanger with area Ap and a counter-flow heat exchanger with area Ac. In both…
- GATE 2016 ME Set 3 · Q28For a heat exchanger, Δ T is the maximum temperature difference and Δ T is the minimum temperature…
- GATE 2015 ME Set 2 · Q52A balanced counterflow heat exchanger has a surface area of 20 m2 and overall heat transfer coefficient of…
Question from the official GATE 2019 ME paper (Set 2), IIT Madras. Solutions by PARIXO AI. All 65 questions of this paper.