PARIXO GATE · ME Open the app

GATE 2020 ME Set 1 · Question 22

1 markMultiple choiceManufacturing EngineeringAbrasive Processes and Jigs & Fixtures

The base of a brass bracket needs rough grinding. For this purpose, the most suitable grinding wheel grade specification is

  1. A

    C30Q12V

  2. B

    A50G8V

  3. C

    C90J4B

  4. D

    A30D12V

GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.12 in the ME section

Answer
(A)

From the official answer key published by IIT Delhi.

Worked solution

A standard grinding wheel designation follows the format: Abrasive Type – Grain Size – Grade – Structure – Bond Type.

1. Abrasive: Brass is a non-ferrous, relatively soft and ductile metal with low tensile strength. Silicon carbide () is preferred over aluminum oxide () because its sharper, more brittle grains cut non-ferrous metals cleaner without loading.
2. Grain Size: Rough grinding requires a coarse or medium grain size (such as ) to achieve high material removal rates, whereas fine grains (e.g., ) are meant for finishing.
3. Grade and Structure: For rough grinding of softer materials, an open structure (e.g., ) provides ample chip clearance to prevent clogging, along with a medium-hard grade (such as ).

Among the choices, C30Q12V correctly uses silicon carbide (), coarse/medium grit (), and an open structure () with a vitrified bond ().

Answer: (A) C30Q12V

Practise Abrasive Processes and Jigs & Fixtures

7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Abrasive Processes and Jigs & Fixtures

Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.