GATE 2018 ME Set 1 · Question 24
A grinding ratio of 200 implies that the
- A
grinding wheel wears 200 times the volume of the material removed
- B
grinding wheel wears 0.005 times the volume of the material removed
- C
aspect ratio of abrasive particles used in the grinding wheel is 200
- D
ratio of volume of abrasive particle to that of grinding wheel is 200
GATE 2018 · Mechanical Engineering · Set 1 · IIT Guwahati · printed as Q.14 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
The grinding ratio, denoted as , is a measure of grinding efficiency defined as the ratio of the volume of work material removed () to the volume of grinding wheel lost due to wear ():
Given :
This means that the grinding wheel wears times the volume of the material removed.
Answer: (B) grinding wheel wears 0.005 times the volume of the material removed
Practise Abrasive Processes and Jigs & Fixtures
7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Abrasive Processes and Jigs & Fixtures
- GATE 2026 ME · Q32A work piece is to be firmly held in a fixture. It is to be machined by using a plain slab milling cutter as…
- GATE 2024 ME · Q30The grinding wheel used to provide the best surface finish is
- GATE 2023 ME · Q15A cuboidal part has to be accurately positioned first, arresting six degrees of freedom and then clamped in…
- GATE 2021 ME Set 1 · Q49In a grinding operation of a metal, specific energy consumption is 15 J/mm3. If a grinding wheel with a…
- GATE 2021 ME Set 2 · Q49A surface grinding operation has been performed on a Cast Iron plate having dimensions 300 mm (length) × 10…
- GATE 2020 ME Set 1 · Q22The base of a brass bracket needs rough grinding. For this purpose, the most suitable grinding wheel grade…
Question from the official GATE 2018 ME paper (Set 1), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.