GATE 2021 ME Set 1 · Question 27
A cantilever beam of length, , and flexural rigidity, , is subjected to an end moment, , as shown in the figure. The deflection of the beam at is
- A
- B
- C
- D
GATE 2021 · Mechanical Engineering · Set 1 · IIT Bombay · printed as Q.17 in the ME section
Answer
From the official answer key published by IIT Bombay.
Worked solution
The cantilever beam carries a concentrated clockwise end moment . The internal bending moment is uniform throughout the length of the beam, .
From the differential equation for beam deflection:
Integrating once with respect to gives the slope:
At the fixed support (), the slope is zero, so .
Integrating a second time gives the deflection:
At the fixed support (), the deflection is zero, which gives .
Therefore, the deflection curve is:
Substituting :
Answer: (C)
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2021 ME Set 2 · Q63A cantilever beam with a uniform flexural rigidity (EI = 200 × 106 N.m2) is loaded with a concentrated force…
- GATE 2020 ME Set 2 · Q38A cantilever of length l, and flexural rigidity EI, stiffened by a spring of stiffness k, is loaded by a…
- GATE 2019 ME Set 2 · Q41A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as…
- GATE 2019 ME Set 2 · Q47A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N×m2 is…
- GATE 2016 ME Set 1 · Q19A cantilever beam having square cross-section of side a is subjected to an end load. If a is increased by…
- GATE 2016 ME Set 2 · Q43A simply supported beam of length 2L is subjected to a moment M at the mid-point x = 0 as shown in the…
Question from the official GATE 2021 ME paper (Set 1), IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.