GATE 2021 ME Set 2 · Question 63
A cantilever beam with a uniform flexural rigidity () is loaded with a concentrated force at its free end. The area of the bending moment diagram corresponding to the full length of the beam is . The magnitude of the slope of the beam at its free end is \_\_\_\_\_\_\_\_\_\_\_ micro radian *(round off to the nearest integer)*.
GATE 2021 · Mechanical Engineering · Set 2 · IIT Bombay · printed as Q.53 in the ME section
Answer
From the official answer key published by IIT Bombay.
Worked solution
By Mohr's first moment-area theorem, the magnitude of the change in slope between the fixed end and the free end of a beam is equal to the area of the diagram between those two points:
Given:
- Area of bending moment diagram,
- Flexural rigidity,
- Slope at the fixed support,
Substituting the given values:
Converting to micro-radians ():
Answer: 50
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2020 ME Set 2 · Q38A cantilever of length l, and flexural rigidity EI, stiffened by a spring of stiffness k, is loaded by a…
- GATE 2019 ME Set 2 · Q41A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as…
- GATE 2019 ME Set 2 · Q47A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N×m2 is…
- GATE 2016 ME Set 1 · Q19A cantilever beam having square cross-section of side a is subjected to an end load. If a is increased by…
- GATE 2016 ME Set 2 · Q43A simply supported beam of length 2L is subjected to a moment M at the mid-point x = 0 as shown in the…
- GATE 2016 ME Set 3 · Q45A beam of length L is carrying a uniformly distributed load w per unit length. The flexural rigidity of the…
Question from the official GATE 2021 ME paper (Set 2), IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.