GATE 2025 ME · Question 38
Match the mold elements in the casting process with the most suitable function
| Mold element | | Function | |
| :--- | :--- | :--- | :--- |
| P | Blind riser | I | Casting with internal cavity |
| Q | Chill | II | Molten metal reservoir |
| R | Skim bob | III | Nucleating agent |
| S | Core | IV | Assisting in faster heat removal from melt |
| T | Insulating sleeve | V | Removal of impurities |
| U | Inoculant | VI | Increasing the solidification time |
- A
P-II, Q-IV, R-V, S-I, T-VI, U-III
- B
P-II, Q-V, R-VI, S-I, T-III, U-IV
- C
P-V, Q-I, R-VI, S-III, T-II, U-IV
- D
P-II, Q-IV, R-I, S-V, T-VI, U-III
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
The functional roles of the given casting mold elements are:
- Blind riser (P): A closed reservoir of molten metal placed in the mold to feed shrinkage as the casting solidifies (P-II).
- Chill (Q): Metallic inserts placed to enhance the cooling rate locally, assisting in directional solidification (Q-IV).
- Skim bob (R): A trap created along the parting plane in the runner system to remove and separate slag, dross, and lighter impurities (R-V).
- Core (S): A preformed insert placed in the mold to produce hollow regions or internal cavities in the casting (S-I).
- Insulating sleeve (T): A sleeve placed around a riser to minimize heat loss, thereby increasing its solidification time so that it solidifies after the casting (T-VI).
- Inoculant (U): Material added to molten metal to act as heterogeneous nucleation sites, refining the grain structure (U-III).
Thus, the correct combination is P-II, Q-IV, R-V, S-I, T-VI, U-III.
Answer: (A) P-II, Q-IV, R-V, S-I, T-VI, U-III
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2025 ME · Q62Two metal parts (a cylinder and a cube) of same volume are cast under identical conditions. The diameter of…
- GATE 2024 ME · Q31The allowance provided to a pattern for easy withdrawal from a sand mold is
- GATE 2024 ME · Q61Aluminium is casted in a cube-shaped mold having dimensions as 20 mm × 20 mm × 20 mm. Another mold of the…
- GATE 2023 ME · Q25In a metal casting process to manufacture parts, both patterns and moulds provide shape by dictating where…
- GATE 2022 ME Set 2 · Q27Consider sand casting of a cube of edge length a. A cylindrical riser is placed at the top of the casting.…
- GATE 2021 ME Set 1 · Q46A true centrifugal casting operation needs to be performed horizontally to make copper tube sections with…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.