GATE 2025 ME · Question 62
Two metal parts (a cylinder and a cube) of same volume are cast under identical conditions. The diameter of the cylinder is equal to its height. The ratio of the solidification time of the cube to that of the cylinder is \_\_\_\_\_\_ (*rounded off to 2 decimal places*).
Assume that solidification time follows Chvorinov’s rule with an exponent of 2.
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
According to Chvorinov's rule, the solidification time is proportional to :
Both parts have the same volume .
For a cylinder of diameter and height :
For a cube of side :
The ratio of the solidification times is:
Since , we have . Therefore:
Answer: 0.85
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2024 ME · Q31The allowance provided to a pattern for easy withdrawal from a sand mold is
- GATE 2024 ME · Q61Aluminium is casted in a cube-shaped mold having dimensions as 20 mm × 20 mm × 20 mm. Another mold of the…
- GATE 2023 ME · Q25In a metal casting process to manufacture parts, both patterns and moulds provide shape by dictating where…
- GATE 2022 ME Set 2 · Q27Consider sand casting of a cube of edge length a. A cylindrical riser is placed at the top of the casting.…
- GATE 2021 ME Set 1 · Q46A true centrifugal casting operation needs to be performed horizontally to make copper tube sections with…
- GATE 2021 ME Set 2 · Q47A cast product of a particular material has dimensions 75 mm × 125 mm × 20 mm. The total solidification time…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.