GATE 2014 ME Set 2 · Question 41
A cantilever beam of length, , with uniform cross-section and flexural rigidity, , is loaded uniformly by a vertical load, per unit length. The maximum vertical deflection of the beam is given by
- A
- B
- C
- D
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.31 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
For a cantilever beam of length fixed at one end and loaded with a uniformly distributed load per unit length over its entire length, the governing differential equation of deflection is:
Taking as the distance from the fixed end, the bending moment at any section is:
Integrating twice with boundary conditions and yields the deflection equation:
The maximum deflection occurs at the free end ():
Answer: (A)
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2014 ME Set 3 · Q45A force P is applied at a distance x from the end of the beam as shown in the figure. What would be the…
- GATE 2012 ME · Q22A cantilever beam of length L is subjected to a moment M at the free end. The moment of inertia of the beam…
- GATE 2023 ME · Q16The effective stiffness of a cantilever beam of length L and flexural rigidity EI subjected to a transverse…
- GATE 2021 ME Set 1 · Q27A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the…
- GATE 2021 ME Set 2 · Q63A cantilever beam with a uniform flexural rigidity (EI = 200 × 106 N.m2) is loaded with a concentrated force…
- GATE 2020 ME Set 2 · Q38A cantilever of length l, and flexural rigidity EI, stiffened by a spring of stiffness k, is loaded by a…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.