GATE 2012 ME · Question 22
A cantilever beam of length is subjected to a moment at the free end. The moment of inertia of the beam cross section about the neutral axis is and the Young's modulus is . The magnitude of the maximum deflection is
- A
- B
- C
- D
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
Consider a cantilever beam of length fixed at and free at , subjected to a concentrated end moment .
The bending moment is constant throughout the beam, . Using the differential equation for beam deflection:
Integrating with respect to and applying the boundary condition for slope at the fixed end, :
Integrating a second time with the boundary condition :
The maximum deflection occurs at the free end ():
Answer: (A)
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2023 ME · Q16The effective stiffness of a cantilever beam of length L and flexural rigidity EI subjected to a transverse…
- GATE 2021 ME Set 1 · Q27A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the…
- GATE 2021 ME Set 2 · Q63A cantilever beam with a uniform flexural rigidity (EI = 200 × 106 N.m2) is loaded with a concentrated force…
- GATE 2020 ME Set 2 · Q38A cantilever of length l, and flexural rigidity EI, stiffened by a spring of stiffness k, is loaded by a…
- GATE 2019 ME Set 2 · Q41A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as…
- GATE 2019 ME Set 2 · Q47A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N×m2 is…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.