GATE 2023 ME · Question 16
The effective stiffness of a cantilever beam of length and flexural rigidity subjected to a transverse tip load is
- A
- B
- C
- D
GATE 2023 · Mechanical Engineering · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
For a cantilever beam of length and uniform flexural rigidity subjected to a concentrated transverse tip load , the downward deflection at the free end is given by standard beam deflection formula:
The effective stiffness is defined as the force required to produce a unit deflection at the point of load application:
Substituting into the expression for :
Option (D) corresponds to the compliance (flexibility) rather than the stiffness.
Answer: (A)
Practise Deflection of Beams
15 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Deflection of Beams
- GATE 2021 ME Set 1 · Q27A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the…
- GATE 2021 ME Set 2 · Q63A cantilever beam with a uniform flexural rigidity (EI = 200 × 106 N.m2) is loaded with a concentrated force…
- GATE 2020 ME Set 2 · Q38A cantilever of length l, and flexural rigidity EI, stiffened by a spring of stiffness k, is loaded by a…
- GATE 2019 ME Set 2 · Q41A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as…
- GATE 2019 ME Set 2 · Q47A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N×m2 is…
- GATE 2016 ME Set 1 · Q19A cantilever beam having square cross-section of side a is subjected to an end load. If a is increased by…
Question from the official GATE 2023 ME paper, IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.