GATE 2015 ME Set 2 · Question 59
In a two-stage wire drawing operation, the fractional reduction (ratio of change in cross-sectional area to initial cross-sectional area) in the first stage is . The fractional reduction in the second stage is . The overall fractional reduction is
- A
0.24
- B
0.58
- C
0.60
- D
1.00
GATE 2015 · Mechanical Engineering · Set 2 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
Let the initial cross-sectional area of the wire be .
The fractional reduction in the first stage is , so the area after the first stage is:
The fractional reduction in the second stage is , so the final area is:
The overall fractional reduction is:
Option (A) represents scaled incorrectly, while (C) incorrectly sums or averages the reductions without compounding.
Answer: (B) 0.58
Practise Bulk Deformation II: Extrusion, Wire Drawing and Powder Metallurgy
10 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Bulk Deformation II: Extrusion, Wire Drawing and Powder Metallurgy
- GATE 2014 ME Set 2 · Q35With respect to metal working, match Group A with Group B: | Group A | Group B | | :--- | :--- | | P: Defect…
- GATE 2012 ME · Q2Match the following metal forming processes with their associated stresses in the workpiece. | Metal forming…
- GATE 2025 ME · Q39Wire drawing operation is performed on a perfectly plastic metal without any strain hardening. Assuming no…
- GATE 2022 ME Set 2 · Q58A cylindrical billet of 100 mm diameter and 100 mm length is extruded by a direct extrusion process to…
- GATE 2021 ME Set 2 · Q15The size distribution of the powder particles used in Powder Metallurgy process can be determined by
- GATE 2018 ME Set 1 · Q45The maximum reduction in cross-sectional area per pass (R) of a cold wire drawing process is R = 1 -…
Question from the official GATE 2015 ME paper (Set 2), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.