GATE 2015 ME Set 2 · Question 58
A cube and a sphere made of cast iron (each of volume ) were cast under identical conditions. The time taken for solidifying the cube was . The solidification time (in s) for the sphere is ________
GATE 2015 · Mechanical Engineering · Set 2 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
According to Chvorinov's rule, the solidification time is proportional to the square of the modulus :
Both the cube and the sphere have the same volume, .
For the cube of side :
For the sphere of radius :
Taking the ratio of solidification times:
Answer: 6.16
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2015 ME Set 3 · Q17In full mould (cavity-less) casting process, the pattern is made of
- GATE 2015 ME Set 3 · Q42Ratio of solidification time of a cylindrical casting (height = radius) to that of a cubic casting of side…
- GATE 2015 ME Set 3 · Q60The dimensions of a cylindrical side riser (height = diameter) for a 25 cm × 15 cm × 5 cm steel casting are…
- GATE 2014 ME Set 1 · Q65An aluminium alloy (density 2600 kg/m3) casting is to be produced. A cylindrical hole of 100 mm diameter and…
- GATE 2014 ME Set 3 · Q32Match the casting defects (Group A) with the probable causes (Group B): | Group A | Group B | | :--- | :---…
- GATE 2014 ME Set 3 · Q35The hot tearing in a metal casting is due to
Question from the official GATE 2015 ME paper (Set 2), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.