GATE 2016 ME Set 3 · Question 59
For an orthogonal cutting operation, tool material is HSS, rake angle is , chip thickness is , speed is and feed is . The shear plane angle (in degrees) is
- A
- B
- C
- D
GATE 2016 · Mechanical Engineering · Set 3 · IISc Bangalore · printed as Q.49 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
For an orthogonal turning operation, the uncut chip thickness is equal to the feed, .
The chip thickness ratio is:
The shear plane angle is related to the rake angle and by:
Substituting the values:
Thus, option (B) is correct.
Answer: (B)
Practise Mechanics of Orthogonal Metal Cutting
27 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Mechanics of Orthogonal Metal Cutting
- GATE 2015 ME Set 1 · Q45An orthogonal turning operation is carried out under the following conditions: rake angle = 5°; spindle…
- GATE 2015 ME Set 2 · Q62A single point cutting tool with 0° rake angle is used in an orthogonal machining process. At a cutting…
- GATE 2015 ME Set 3 · Q44Orthogonal turning of a mild steel tube with a tool of rake angle 10° is carried out at a feed of 0.14…
- GATE 2014 ME Set 1 · Q33The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400…
- GATE 2014 ME Set 1 · Q62During pure orthogonal turning operation of a hollow cylindrical pipe, it is found that the thickness of the…
- GATE 2014 ME Set 3 · Q30A straight turning operation is carried out using a single point cutting tool on an AISI 1020 steel rod. The…
Question from the official GATE 2016 ME paper (Set 3), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.