GATE 2015 ME Set 2 · Question 62
A single point cutting tool with rake angle is used in an orthogonal machining process. At a cutting speed of , the thrust force is . If the coefficient of friction between the tool and the chip is , then the power consumption (in kW) for the machining operation is _______
GATE 2015 · Mechanical Engineering · Set 2 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
In orthogonal machining, Merchant's circle relates the friction force and normal force on the tool face to the cutting force and thrust force :
For a zero rake angle ():
The coefficient of friction is given by:
The cutting speed in is:
The power consumption is:
Answer: 2.1
Practise Mechanics of Orthogonal Metal Cutting
27 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Mechanics of Orthogonal Metal Cutting
- GATE 2015 ME Set 3 · Q44Orthogonal turning of a mild steel tube with a tool of rake angle 10° is carried out at a feed of 0.14…
- GATE 2014 ME Set 1 · Q33The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400…
- GATE 2014 ME Set 1 · Q62During pure orthogonal turning operation of a hollow cylindrical pipe, it is found that the thickness of the…
- GATE 2014 ME Set 3 · Q30A straight turning operation is carried out using a single point cutting tool on an AISI 1020 steel rod. The…
- GATE 2014 ME Set 3 · Q64Which pair of following statements is correct for orthogonal cutting using a single-point cutting tool? P.…
- GATE 2014 ME Set 4 · Q33Better surface finish is obtained with a large rake angle because
Question from the official GATE 2015 ME paper (Set 2), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.