GATE 2018 ME Set 2 · Question 48
A bar is subjected to a combination of a steady load of and a load fluctuating between and . The corrected endurance limit of the bar is , the yield strength of the material is and the ultimate strength of the material is . The bar cross-section is square with side . If the factor of safety is , the value of (in mm), according to the modified Goodman's criterion, is ________ (correct to two decimal places).
GATE 2018 · Mechanical Engineering · Set 2 · IIT Guwahati · printed as Q.38 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
The bar is subjected to a steady load of and a fluctuating load between and .
The minimum and maximum total loads are:
The mean and alternating load components are:
For a square cross-section with side , area . The mean and alternating stresses are:
Using the modified Goodman criterion with factor of safety , corrected endurance limit , and ultimate strength :
Answer: 31.62
Practise Design for Dynamic Loading & Fatigue
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Design for Dynamic Loading & Fatigue
- GATE 2017 ME Set 1 · Q43A machine element has an ultimate strength (σu) of 600 N/mm2, and endurance limit (σen) of 250 N/mm2. The…
- GATE 2017 ME Set 2 · Q11A machine component made of a ductile material is subjected to a variable loading with σ = -50 MPa and σ =…
- GATE 2016 ME Set 2 · Q48In a structural member under fatigue loading, the minimum and maximum stresses developed at the critical…
- GATE 2015 ME Set 1 · Q29Which one of the following is the most conservative fatigue failure criterion?
- GATE 2015 ME Set 3 · Q11For the given fluctuating fatigue load, the values of stress amplitude and stress ratio are respectively
- GATE 2014 ME Set 2 · Q20In a structure subjected to fatigue loading, the minimum and maximum stresses developed in a cycle are 200…
Question from the official GATE 2018 ME paper (Set 2), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.