GATE 2024 ME · Question 64
A flat surface of a C60 steel having dimensions of is produced by a HSS slab mill cutter. The 8-toothed cutter has diameter and width. The feed per tooth is , cutting velocity is and depth of cut is . The machining time required to remove the entire stock is _______ minutes *(rounded off to 2 decimal places)*.
GATE 2024 · Mechanical Engineering · IISc Bangalore
Answer
From the official answer key published by IISc Bangalore.
Worked solution
Given:
- Diameter of cutter,
- Number of teeth,
- Feed per tooth,
- Cutting velocity,
- Depth of cut,
- Workpiece length,
The rotational speed of the cutter is:
The table feed rate is:
The approach distance for slab milling is:
1. Considering approach only ():
2. Considering both approach and overtravel ():
Both values lie in the official range [2.2, 2.65].
Answer: 2.24
Practise Basic Machine Tools and Operations
24 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Basic Machine Tools and Operations
- GATE 2022 ME Set 2 · Q54A straight-teeth horizontal slab milling cutter is shown in the figure. It has 4 teeth and diameter (D) of…
- GATE 2021 ME Set 1 · Q17In a machining operation, if a cutting tool traces the workpiece such that the directrix is perpendicular to…
- GATE 2021 ME Set 1 · Q18The correct sequence of machining operations to be performed to finish a large diameter through hole is
- GATE 2020 ME Set 1 · Q52A slot of 25 mm × 25 mm is to be milled in a workpiece of 300 mm length using a side and face milling cutter…
- GATE 2020 ME Set 2 · Q54There are two identical shaping machines S1 and S2. In machine S2, the width of the workpiece is increased…
- GATE 2019 ME Set 1 · Q25The length, width and thickness of a steel sample are 400 mm, 40 mm and 20 mm, respectively. Its thickness…
Question from the official GATE 2024 ME paper, IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.